728X90
Liitokala lii-402 Lii-202 Lii-100 Lii-S1 Lii-PD4 can be charged 1.2V AA/AAA 3.7V 26650 18650 16340 lithium battery charger

Liitokala lii-402 Lii-202 Lii-100 Lii-S1 Lii-PD4 can be charged 1.2V AA/AAA 3.7V 26650 18650 16340 lithium battery charger

98% of buyers enjoyed this product! 32 orders
TODAY'S DEAL Ends in: 04:36:18
List price:
R$ 22.40
Price:
R$ 17.68

Product Description

Esta gostando deste site? Quer ter um? Inscreva-se no formulário abaixo para saber como ter o seu! E também receber atualizações deste site!

LiitoKala new product charger, please click the picture to learn more!

LiitoKala Lii-S1

Technology once again innovation, Auto-polarity detection. Do not need to distinguish the battery polarity. As long as the battery is rechargeable battery that can be charged. Do not worry about battery polarity reverse.Good Charger.

In addition to Auto-polarity detection there is a strong visible digi-dispaly. Visually beautiful. Function continues the Lii-100, very good.

Specifications

Input: Micro USB DC 5V / 1A (min.)

Output voltage: DC 4.2V 500mA / 1000mA for Li-Ion

DC 4.35V 500mA / 1000mA for IMR

DC 3.65V 500mA / 1000mA for LeFePO4

DC 1.48V 500mA / 1000mA for NiMH / NI-Cd

Constant voltage charging with cut-off current less then 100mA

Standby current: No more than 15mA

Compatible for Batteries:

Li-ion / IMR / LiFePO4: 26650, 20700, 18650, 18490, 17700, 17500, 16340 (RCR123), 14500, 10440

Ni-MH / Cd: AA, AAA, A, SC, C size

Size (mm) / Weight (grams):

Length 112mm x Width 37mm x Height 32mm

45 grams (charger) + 17grams (USB cable) included in delivery

Features:

1, One-slot charging and management system, Micro USB DC 5V input port

2, Battery polarity auto-detection (Any Polarity)

3, 500mAh / 1000mAh charging current for selection

4, Built-in digital tube indicator shows the real-time charging status of voltage and current

5, Identify Li-ion and Ni-MH battery automatically

Select manually by short-press the mode button for IMR battery (3.85V Li-ion) and LiFePO4 battery (3.2V)

6, Activation function for 0V battery of PCM protection.

7, Can not charge battery with 0.0 ≦ U <0.2V for NiMH / Cd and 1.6 ≦ U <2.2V for Li-Ion

8, Over-charging and over-discharge protection

9, Identify broken / defective battery

10, Charging under constant voltage and current

Operation instruction:

There’s a ‘MODE’ button for choosing the battery types and charging current

Long press the ‘MODE’ button for 3 seconds to change the charging current, you can change the charging current at any time

Short press the ‘MODE’ button to change the charging types of lithium batteries. If no setting, it will default as 1.2V Ni-MH or 3.7V li-ion battery automatically. You need to change the mode for 3.85V li-ion and 3.2V LiFePO4 battery

It begins to charge the battery 5 seconds after your settings

When the battery is inserted or defective battery is inserted, the charger will have no any response showing “null” ; When the battery is fully charged, it shows “Full”

It can display the battery voltage and charge current by short press the ‘MODE’ button at any time during charging

Lii-402 charger for instructions 1, the buyer attention 1. This charger can only charge cylindrical lithium ion battery (3.7V, 3.8V), nickel hydrogen / nickel cadmium, lithium iron phosphate battery; 2. Before use, please carefully refer to the instructions, pay attention to the recommended rechargeable battery charging current, do not exceed the recommended current charge; 3. Charge with a 5V USB adapter (adapter current recommended 2A); 4. Charger charge and discharge may be fever, be careful not to burn; 5. When you stop using it, unplug the power and unplug the battery. 6. Can only be used in normal room. 7. This product test data is for reference only, the actual situation, please refer to professional equipment. 2, the charger requirements and functions: 1. Micro USB DC 5V input, two separate charging and microcomputer management system 2. Available for 4 kinds of charging current selection (500mA / 700mA / 1000mA / 2000mA) 2000mA designated fourth slot. 3. LED display Charge status 25% 50% 75% 100% and battery type NiMH 1.2V Li-Fe 3.2V Li-ion 3.7V Li-ion 3.85V. 4. Can automatically identify lithium (Li-ion) batteries and nickel-metal hydride (Ni-MH) batteries, manually select the iron phosphate (Liepo4) battery and Li-ion 3.85V battery 5. 0V voltage activation function, 1.65-1.85V can not be charged (but there will be activated current trickle type charge). 6. Have over-charge, short circuit, intelligent identification of bad batteries and reverse battery detection protection. 7. Charging mode, constant current constant pressure 8. Using DC input, the charger power supply for the 5V-2A (Micro plug) 9. With standard 5V / 1000mA USB automatic identification output function, 3, the key, LED and function description 1. Press the key: hold the selector key for 2 seconds to switch 500mA 700mA 1000mA 2000mA charge current at power on, When charging the battery, press the select key to change the type of rechargeable battery. When the rechargeable battery type is selected (for example, 3.20V 3.85V) for 5 seconds, enter the charging state. 2. LED: charger connected to the 5V power supply, the charger all the LED moment all bright, if the battery is not put into the charging slot, 500mA (LED) indicator light is on, the other lights go out. When the battery is detected, the four LED lights are all bright, 3.7LED light will flash, then press the button to select the type of battery you need to charge, if not selected, 5 seconds into the default identification of the battery charge, charge The indicator light flashes at the corresponding charge ratio. Press the button to check the charge type (no power indication) 5 seconds after the return to the state of charge. When not energized, insert the battery to view the power ratio (5 seconds after extinguishing, need to view again press) USB output indication: When the USB output is detected, the power indicator turns on for 10 seconds and presses to check the power. 4. LED display reference picture 4, the electrical technical parameters: 1, input power: Micro USB DC 5V / 2A 2, the output voltage: 1.42V 4.2V ± 0.05V, 3.65 ± 0.05V 4.35 ± 0.05V 3, the output current: 2000mA * 1 1000mA * 2 700mA * 3 500mA * 4 4, constant voltage charging, cut-off current: <100m A; 5, external power supply standby current: <15.0m A; 5, USB output function: 1, USB port output no-load voltage: 4.90-5.30V; specify the fourth slot for the USB output 2, the output current: 1000 m A; 3, no-load current: <1m A; 4, load 1000m A current, the port output voltage: 4.75-5.25V; 5, stop output protection voltage: 3.0 ± 0.1V; 6, compatible batteries: Li-ion / IMR: 18650, 18490, 18350, 17670, 17500, 16340 (RCR123), 14500, 10440 7, charger size: 112mm × 90mm × 30mm (length / width / height) Weight: g + g (micro line) Lii-202 charger for instructions This device is designed for portable, flexible, and several types of batteries. it can detect the battery type and charging the battery is automatically selected in accordance with the charging current. Built-in LED indicators to show charging status and 5 V / 100 mAh USB output function warming: this charge is only for charging the cylindrical lithium ion (3.7, 3.8), ni-mh / Ni-Cd, LiFePO4 (Li-Ion) batteries. Please read these instructions before use; pay attention to the recommended charging current, never choose the wrong charging current when charging with 5V USB AC adapter, 2A-current AC adapter recommended Charger ma hot during operation for a long time, handle with care! please cut off the electricity and remove the battery from the charger when charging is complete. indoor condition only !! data mapping Charger for reference only; please refer to the professional devices, if you need accurate data 2. Features and Specifications: Micro USB DC 5V input, two independent slots and charging channels with built-in micro-computer control system to ensure high efficiency Two charging current parameters (0.5A / 1.0A) Four LEDs indicate the charging status (25%, 50%, 75%, 100%), and also shows the type of battery if it is installed in the battery (1.2 V Ni-Mh, 3.2 in Li-Fe, 3.7 in Li-Ion, 3.85 in li-ion) automatically identify Li-Ion and Ni-Mh; But, you need to adjust the charging mode for LiFePO4 and 3.85 in the lithium-ion battery it can actively 0 V battery, but the device does not charge in the 1.65 ~ 1.85 The types of batteries. built with over-charging protection, over-discharge and reverse polarity protection. besides, it can detect a broken battery. Charing mode: instantaneous value of current and voltage. STANDING charging current: Operating voltage 5V-2A (Micro-connector) Standard automatic 5 V / 1000 mAh USB output port 3. Select the button, LED and function. MODE button: select the type of battery when installing the battery. it will begin to charge the battery after fixing the battery type (please note that it will automatically identify Li-Ion and Ni-Mh, no need to choose manually) Press and hold for 2 seconds, when after connecting to power, it can be switched between charging current of 0.5A and 1.0A; led indicator connect the charger to power, all LED indicators will be on when the battery is inserted after 5 seconds, the LED will be turned off except for the indicator 0.5A current when the battery is inserted into the device, 4 LEDs will be turned on and 3.7 V LED is flashing, please press the MODE button to set the correct type of battery. it will begin to charge the battery after 5 seconds, and the LED indicator shows charging status. Press the MODE button to show the type of battery (5 seconds) during charging and return to show the charging status it can show the remaining battery power, if you put the battery in the charger (not connected to the charging source) USB output indicator: When the USB output is detected, the volume of the battery indicator will be on for 10 seconds and then off, press the button to display the volume rate of the battery. 4. Specification: Input: Micro USB DC 5V / 2A Output: 1.4, 4.2 ± 05, ± 05 3.65 ± 4.35 05 Output Current: 500/1000 mAh constant voltage charging cut-off current: <100 mAh Standby current: <15 mAh 5. USB output function USB output load voltage: 4.90 V-5.30 Output Current: 1000 mAh (1A) No-load current: <1 mAh the output voltage of 4.75 V-5.25 V, when the current 1000 mAh output over-voltage protection: 3.0 ± 1 6. Compatibility li-ion / IMR: 18650, 18490, 18350, 17670, 17500, 16340 (RCR123), 14500, 10440 7. Size 112 mm × 60 mm × 30 mm / 86 g + 15 g USB cable ​ Lii-100 charger for instructions Law-100 Charger Product Description: First, load requirements and functions: 1. The use of micro USB 5 V DC input, single-slot charging and management system independent microcomputer 2. Selection available two types of charging current (500mA / 1000mA) 3. LED shows the state of charge 25% 50% 75% 100% and NiMH battery type Li-Fe 1.2 V 3.0 V 3.7 V LI-ION LI-ION 3.85 V. 4. It can automatically identify lithium battery (Li-ion) batteries and nickel-metal hydride (Ni-MH) battery, manual treatment with iron phosphate (Liepo4) LI-ION batteries and battery 3.85 V 5. There are 0 V Switching voltage, 1.6-2.2 V no charge (but donations current load flow pattern will be activated). 6. Do not overcharge and over discharge, short circuit, intelligent recognition bad battery detection and reverse battery protection. (Note: short, bad battery, reverse polarity, charger does not work, LED is not lit) 7. Charging mode, constant voltage constant current 8. Using a DC input power for the charger to work 5V-1A (Micro Plug) 9. A paragraph: standard 5 V / 1000 mA USB output automatic identification, Paragraph B: no USB output function Second, the description of the keys, LED and function 1. Press: under power, any time hold the select button 2 seconds each 500MA 1000MA charging current converter; Battery charge, press SELECT button to change the type of rechargeable battery, the battery needs to be charged when the selected type (example 3 V 3.85 V) 5 seconds to enter the state of charge. 2. LED: charger connected to 5 V power supply, charger all LED full brightness instantly, without a battery in the charging slot, 500mA (LED) indicator light, other lights go out. Upon detection of a battery, four LED lights, then you can tap the button to select the desired rechargeable battery type, if you do not choose, five seconds after entering the default recognition of battery charge, charge indicator according to the corresponding power ratio flashes. Press the button to check the load pattern (no charge indicator) five seconds after the return to the state of charge. When not energized, insert the battery charge can be seen Ratio (5 seconds and then go off, you need to see the press again) Usb output indication: when the usb output power indicator turns off after 10 seconds, the power button can see is detected. Third, the electrical technicians parameters: 1 input power: USB Micro DC 5 v / 1a 2, the output voltage: 4.2 V ± 1% / 5 V 3, the output current: 500ma / 1000th 4 constant voltage charging, current: <100 m; 5, the external power source current standby: <15.0mA; Four USB output function: 1 output port USB charge voltage: 4.90-5.30 v; 2, the output current: 1000mA 3, the No-load current: <1mA; 4 1000 m load current, the voltage output port: 4.75-5.25 v; 5, stop protection voltage output: 3.0 ± 0.1 v; V. battery: Li-ion / RMR: 18650, 18490, 18350, 17670, 17500, 16340 (rcr123), 14500, 10440 Charger dimensions: 113mm × 38mm × 32mm (length / width / height) Weight: ** g (without battery, power cord)

Esta gostando deste site? Quer ter um? Inscreva-se no formulário abaixo para saber como ter o seu! E também receber atualizações deste site!

Lii-PD4 Charger specifications:

Specifications and functions:

1. Multi-power input: AC cable 110-240V 50/60Hz (included)/ 12V 1A adapter(selective), four independent charging and micro computer management system.

2. Charge current intelligent auto-set of total three levels: 500mA /1000mA/2000mA),2000mA is fixed only for slot#4.

3. Multi-functional LCD charging display: for charging progress 25% – 50% – 75% -100% , battery types: Ni-MH 1.2V , Li-Fe 3.2V, Li-ion 3.7V, Li-ion 3.80V (IMR), charging capacity, voltage and current: 0.5A/1A/2A.

4. Identify Li-ion and Ni-MH batteries automatically and adjust manually the charging mode for LiFePO4 and 3.80V li-ion batteries(IMR)

5. Refresh for OV battery. It will not charge any battery of1.65 -2.20V (refresh current can be detected only)

6. Multi-safety protection function of over-charge and over-discharge, short circuited, polarity reverse and so on. It can smartly identify broken batteries with much more safety.

7. Charging at constant voltage and current

Button and LCD :

1. Button of Mode(Channel button): there are 4 independent buttons separately for each channel. While power supply is connected and battery inserted, 1) Short click the channel button in 5S to change the battery type. It will start to charge 5 seconds after setting the battery type (3.2V or 3.80V), 1.2V Ni-MH and 3.7V li-ion can be detected automatically, so it needs setting only 3.2V and 3.8V batteries;

Note: Battery type can be only selective before charging starts.

2. LCD: While power supply connected, the LCD will light up for 3S: 1) If no battery is inserted, the LCD will display “null” and will be off in 30S 2) When battery is inserted and detected, the LCD will show channel number while the battery type image “ Li-Ion 3.7V”flashing indicating to set the battery type: this moment if short click the channel button, it can set battery type; if no operation in 5 seconds, it begins by automatic detection(Li-Ion 3.7V or NIMH) then charging percentage image will flash meaning the start of charging. At the same time the LCD displays also charge voltage, capacity, time and current. When charge completes, it will display“100%”mean while it shows “End” on the LCD right down corner.

LCD display graphic reference:

Electrical Parameters:

1. Input : AC cable 110-240V 50/60Hz (included)/ DC 12V 1A(selective)

2. Output voltage: DC 4.2V for Li-Ion 3.7V

DC 4.35V for Li-Ion 3.8V( IMR)

DC 3.65V for LiFePO4

DC 1.48V for NiMH/NI-Cd

3. Output current: Li-Ion/IMR/LiFePO4 2000mA*1(only for slot#4),

1000mA*2, 500mA*3 500mA*4

NiMH/NiCd: 1000mA*2, 500mA*3 500mA*4

4. Constant voltage, cut-off current: less than 100mA

5. Standby current: less than 15mA

Compatible battery types and sizes

Li-ion / IMR/LiFePO4: 26650,21700,20700, 18650, 18490, 18350, 17670, 17500, 16340(RCR123), 14500, 10440

NiMH/Cd: AA, AAA,SC, C

Size and weight:

133mm x 100mm x 35mm (L x W x H)

Weight: approx175g (not including AC cable)

Cautions:

  1. This charger can charge all cylindrical rechargeable batteries 3.7V Li-Ion , 3.8V IMR, 1.2V Ni-MH/Cd, 3.2VLiFePO4
  2. Read this manual before use and pay special attention to the recommended charge current, must avoid to charge battery beyond the recommended current limit
  3. If DC input, only 12V 1A is recommended
  4. Mind heating while charging
  5. Remove the charger from power source after charging complete, and remove the battery from the charger at the same time
  6. For indoor use only
  7. The displaying data only for reference, please refer to professional instrument for more accurate data

Lii-500 Charger specifications: • DC12V / 2A input power. • 4 bay independent ports • Test the capacity of the battery • LCD screens show different modes • 3 modes of worke • 4 charging current (300.500, 700, 1000 mAh) • Supports different battery sizes • Automatic identification of the type of battery (Li-Ion, Ni-MH) • Protection against overload. Positive and negative inverse protection. Protection against temperature. Negative voltage detection of the NiMH battery (-dtv). • Detection of battery failure • 5 V 1000 mAh USB output download • For NiMH / CD AAA / Micro, AA / mignon, c. Li-Ion 26650, 22650, 18650.18490, 18500, 17500, 17355, 16340 (RCR123), 14,500, 10440

Esta gostando deste site? Quer ter um? Inscreva-se no formulário abaixo para saber como ter o seu! E também receber atualizações deste site!

Packaging Details

Unit Type: 
 piece
Our store ships to more than 200 countries and you can enjoy free shipping on all items sold on sovc.ml
Estimated Delivery Time is 7-30 business.

Note: The delivery time mentioned above does not include order processing time that usually varies from 1 to 3 days.
Different items have their own processing time, which is what we cannot control. But what we can do is try the best to let you receive your items as soon as possible.

The following cases should be taken into consideration regarding shipping times:
  • Weight and dimensions of a package
  • Place of Dispatch
  • Destination
  • Freight
Average Star Rating:
0 out of 5 ( 0 Ratings)

Feedback Rating for This Product

Positive (0%) 5 Stars (0)
4 Stars (0)
Neutral (0%) 3 Stars (0)
Neutral (0%) 2 Stars (0)
1 Stars (0)
Importante: Este site faz uso de cookies que podem conter informações de rastreamento sobre os visitantes.
Criado por WP RGPD Pro